K-1688 Specialized Spectrometer for the Scrap Metal Recycling Industry

On-site non-destructive, rapid and accurate analysis and detection of alloy elements and identification of alloy grades; Rapidly analyze the content of more than twenty-three elements from Ti to U.

Product application:

1.It is used for on-site non-destructive, rapid and accurate analysis and detection of alloy elements and identification of alloy grades.

2. Rapidly analyze the content of more than twenty-three elements from Ti to U.

Product Features:

1.One-click operation eliminates complex operation options and effectively prevents human errors.

2.It only takes 45 seconds from startup to testing, and the alloy grade and data are available in 0.8 seconds.

3. The lowest-priced model on the market, specifically designed for the recycling of scrap metals (scrap stainless steel, scrap tin, scrap brass) (Note: Only common alloy mode, no precious metal mode)

Technical Specifications of K-1688 Handheld Spectrometer

1.Excitation source: High-power miniature straight plate electron X-ray tube, with an excitation voltage of 35kV; No high-voltage cables, no radio frequency noise, better X-ray shielding, and better heat dissipation. Fixed voltage: 35kV, current: 100uA (Moxtek, USA), standard equipped with Ag target, no motor, 1 filter

2. Detector: Si-pin detector (6 mm2, energy resolution 190eV FWHM)

3. Calculation method: KMX-FP test method without standard samples

4. Standard configuration includes 1 battery

Instrument design features:

1. Excellent heat dissipation: More than half of the body is designed with an aluminum alloy shell. There is a slot-type heat dissipation device on the top of the instrument. The entire system makes heat dissipation very effective, extends the machine's lifespan, and makes the X-ray analyzer work more stably, thus having an extremely low failure rate

2. Simple operation: The design concept of the instrument is based on the principle of simplicity and economy. In terms of hardware, it adopts a fixed high voltage, eliminates the need for complex internal motors and filters, and has an external 316 calibration plate, among other simple designs. The software adopts a foolproof operation interface. Truly enable customers to obtain more profits at the lowest cost.

3. Power feedback lamp; Top and bottom radiation warning flashing lights; Diamond-patterned soft rubber handle The instrument has excellent balance. It can stand on the workbench during testing without the need for hand support. The one-button design ensures no fatigue even after prolonged operation. The display screen adopts an integrated design of the entire machine, with a connected structure. The PDA is non-detachable, dust-proof, fog-proof, water-proof, and has a low failure rate. It is an industrial-grade high-resolution TFT touch display color screen.

4. Precise test data: The fully automatic analysis standard library contains over 500 standard grades, capable of analyzing up to 10,000 alloys, and users can customize 300 types. The compensatory testing method for irregular or small samples can detect very small or few samples. Even a fine wire with a diameter of 0.04mm can be identified immediately. It can analyze 23 elements including Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Hf, Ta, W, Re, Pb, Bi, Zr, Nb, Mo, Cd, Sn, Sb, etc